 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 32.0-46.0 GHz GaAs MMIC Balanced Mixer September 2007 - Rev 04-Sep-07 M1000-BD Features Fundamental Balanced Mixer 7.0 dB Conversion Loss +24 dBm Input Third Order Intercept 100% On-Wafer RF Testing 100% Visual Inspection to MIL-STD-883 Method 2010 Chip Device Layout General Description Mimix Broadband's 32.0-46.0 GHz GaAs MMIC fundamental balanced mixer has been optimized for use as a down-converter. The device has a conversion loss of 7.0 dB with a +24.0 dBm input third order intercept point. This MMIC uses Mimix Broadband's 0.15 m GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. The chip has surface passivation to protect and provide a rugged part with backside via holes and gold metallization to allow either a conductive epoxy or eutectic solder die attach process. This device is well suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications. Absolute Maximum Ratings Gate Bias Voltage (Vg) Input Power (RF Pin) Storage Temperature (Tstg) Operating Temperature (Ta) +0.3 VDC +20.0 dBm -65 to +165 OC -55 to +125 OC Electrical Characteristics (Ambient Temperature T = 25o C) Parameter Frequency Range (RF) Upper Sideband Frequency Range (RF) Lower Sideband Frequency Range (LO) Frequency Range (IF) RF Return Loss (S11) IF Return Loss (S22) LO Return Loss (S33) Conversion Loss (S21) LO Input Drive (PLO) Isolation LO/RF Isolation LO/IF Isolation RF/IF Input Third Order Intercept (IIP3) Gate Bias Voltage (Vg1) Units GHz GHZ GHz GHz dB dB dB dB dBm dB dB dB dBm VDC Min. 32.0 33.0 29.0 DC -2.0 Typ. 15.0 10.0 20.0 7.0 +15.0 TBD TBD TBD +24.0 -0.6 Max. 46.0 44.0 47.0 3.0 +0.1 Page 1 of 6 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 32.0-46.0 GHz GaAs MMIC Balanced Mixer September 2007 - Rev 04-Sep-07 M1000-BD Mixer Measurements XM1000-BD Vg=-1.1V, USB LO=+12 dBm, IF=3 GHz, RF=-30 dBm, ~380 Devices 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 30.0 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 30.0 XM1000-BD Vg=-1.1V, LSB LO=+12 dBm, IF=3 GHz, RF=-30 dBm, ~380 Devices Conversion Loss (dB) Conversion Loss (dB) 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 Frequency (GHz) Max Median Mean -3sigma Max Frequency (GHz) Median Mean -3sigma XM1000-BD Vg=-1.1V LO=+12 dBm, IF=3 GHz. RF=-30 dBm, ~210 Devices 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 0 -5 XM1000-BD Vg=-1.1V LO=+12 dBm, IF=3 GHz. RF=-30 dBm, ~210 Devices LO Port Return Loss (dB) RF Port Return Loss (dB) -10 -15 -20 -25 -30 -35 -40 -45 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 Frequency (GHz) Max Median Mean -3sigma Max Frequency (GHz) Median Mean -3sigma Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 32.0-46.0 GHz GaAs MMIC Balanced Mixer September 2007 - Rev 04-Sep-07 M1000-BD Mixer Measurements (cont.) XM1000-BD: USB Conversion gain (dB) vs. RF freq (GHz) Vg = -1.1V, LO = 12dBm, IF = 1GHz 0 XM1000-BD: LSB Conversion gain (dB) vs. RF freq (GHz) Vg = -1.1V, LO = 12dBm, IF = 1GHz 0 -2 -2 -4 -6 -8 -10 -12 -14 -16 DeviceCoord=R3C1, LO Power (dBm)=12 -4 -6 USB Conversion gain (dB) LSB Conversion gain (dB) -8 -10 -12 -14 -16 DeviceCoord=R3C1, LO Power (dBm)=12 DeviceCoord=R4C1, LO Power (dBm)=12 -18 DeviceCoord=R4C1, LO Power (dBm)=12 -18 -20 34 35 36 37 38 39 40 RF freq (GHz) 41 42 43 44 45 46 -20 34 35 36 37 38 39 40 RF freq (GHz) 41 42 43 44 45 46 XM1000-BD: USB Conversion gain (dB) vs. RF freq (GHz) Vg = -1.1V, LO = 12dBm, IF = 3GHz 0 -2 -4 -6 -8 -10 -12 -14 -16 DeviceCoord=R3C1, LO Power (dBm)=12 XM1000-BD: LSB Conversion gain (dB) vs. RF freq (GHz) Vg = -1.1V, LO = 12dBm, IF = 3GHz 0 -2 -4 -6 USB Conversion gain (dB) LSB Conversion gain (dB) -8 -10 -12 -14 -16 DeviceCoord=R3C1, LO Power (dBm)=12 -18 DeviceCoord=R4C1, LO Power (dBm)=12 -18 DeviceCoord=R4C1, LO Power (dBm)=12 -20 36 37 38 39 40 41 RF freq (GHz) 42 43 44 45 46 -20 34 35 36 37 38 39 40 41 42 43 RF freq (GHz) XM1000-BD: LSB Conversion gain (dB) vs. RF freq (GHz) Vg = -1.1V, LO = 15dBm, IF = 1GHz 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 34 35 36 37 38 39 RF freq (GHz) 40 41 42 43 44 DeviceCoord=R3C1, LO Power (dBm)=15 DeviceCoord=R4C1, LO Power (dBm)=15 XM1000-BD: LSB Conversion gain (dB) vs. RF freq (GHz) Vg = -1.1V, LO = 15dBm, IF = 3GHz 0 -2 -4 -6 LSB Conversion gain (dB) LSB Conversion gain (dB) -8 -10 -12 -14 -16 -18 -20 34 35 36 37 38 RF freq (GHz) 39 40 41 42 DeviceCoord=R3C1, LO Power (dBm)=15 DeviceCoord=R4C1, LO Power (dBm)=15 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 32.0-46.0 GHz GaAs MMIC Balanced Mixer September 2007 - Rev 04-Sep-07 M1000-BD Mixer Measurements (cont.) Input Referred IP3 vs Freq at USB 30 28 26 24 22 II P3 (dB) 20 18 16 14 12 10 30 32 34 36 RF (GHz ) 38 40 42 030200 5dBm 030200 10dBm 030200 15dBm 020200 10dBm 020200 15dBm 020300 5dBm 020300 10dBm 020300 15dBm 16 14 12 10 30 32 34 36 RF (GHz) 38 40 42 IIP3 (dB) 30 28 26 24 22 20 18 030200 5dBm 030200 10dBm 030200 15dBm 020200 5dBm 020200 10dBm 020200 15dBm 020300 5dBm 020300 10dBm 020300 15dBm Input Referred IP3 vs Freq at LSB 020200 5dBm IP1dB vs LO Power at 32GHz 18 16 14 Input Referred P1dB Input Referred P1dB 18 16 14 IP1dB vs LO Power at 36GHz 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 LO Power (dBm) 020400 USB 030200 USB 030300 USB 020400 LSB 030200 LSB 030300 LSB 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 LO Power (dBm) 020400 USB 030200 USB 030300 USB 020400 LSB 030200 LSB 030300 LSB IP1dB vs LO Power at 40GHz 14 12 Input Referred P1dB 10 8 6 4 2 0 0 2 4 6 LO Power (dBm) 8 10 12 020400 USB 030200 USB 030300 USB 020400 LSB 030200 LSB 030300 LSB Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 32.0-46.0 GHz GaAs MMIC Balanced Mixer September 2007 - Rev 04-Sep-07 Mechanical Drawing 1.300 (0.051) 0.993 (0.039) 0.386 (0.015) 0.785 0.983 (0.031) (0.039) M1000-BD 2 1 3 4 5 0.993 (0.039) 0.0 0.0 6 0.536 (0.021) 1.300 (0.051) (Note: Engineering designator is 40BRFM0058) Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad. Thickness: 0.110 +/- 0.010 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold All DC Bond Pads are 0.100 x 0.100 (0.004 x 0.004). All RF Bond Pads are 0.100 x 0.200 (0.004 x 0.008) Bond pad centers are approximately 0.109 (0.004) from the edge of the chip. Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 1.048 mg. Bond Pad #1 (LO) Bond Pad #2 (Vg1) Bond Pad #3 (Vg2) Bond Pad #4 (Vd) Bond Pad #5 (RF) Bond Pad #6 (IF) Bias Arrangement Vg1 Vg2 [1] Vd[1] 2 LO 3 4 5 RF 1 App Note [1] Biasing - As shown in the bonding diagram, the pHEMT mixer devices are operated using a separate gate voltage Vg1. Set Vg1=-0.6V for optimum conversion loss performance. pHEMT test device (Vd,Vg2) with 100 Ohm resistor is provided so that mixer gate bias can be corrected for local Vto. App Note [2] Bias Arrangement - Each DC pad (Vg1) needs to have DC bypass capacitance (~100-200 pF) as close to the device as possible. Additional DC bypass capacitance (~0.01 uF) is also recommended. 6 IF Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 32.0-46.0 GHz GaAs MMIC Balanced Mixer September 2007 - Rev 04-Sep-07 M1000-BD Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: * Do not ingest. * Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. * Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ESD - Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-static workstation. Devices need careful handling using correctly designed collets, vacuum pickups or, with care, sharp tweezers. Die Attachment - GaAs Products from Mimix Broadband are 0.100 mm (0.004") thick and have vias through to the backside to enable grounding to the circuit. Microstrip substrates should be brought as close to the die as possible. The mounting surface should be clean and flat. If using conductive epoxy, recommended epoxies are Tanaka TS3332LD, Die Mat DM6030HK or DM6030HK-Pt cured in a nitrogen atmosphere per manufacturer's cure schedule. Apply epoxy sparingly to avoid getting any on to the top surface of the die. An epoxy fillet should be visible around the total die periphery. For additional information please see the Mimix "Epoxy Specifications for Bare Die" application note. If eutectic mounting is preferred, then a fluxless gold-tin (AuSn) preform, approximately 0.0012 thick, placed between the die and the attachment surface should be used. A die bonder that utilizes a heated collet and provides scrubbing action to ensure total wetting to prevent void formation in a nitrogen atmosphere is recommended. The gold-tin eutectic (80% Au 20% Sn) has a melting point of approximately 280 C (Note: Gold Germanium should be avoided). The work station temperature should be 310 C +/- 10 C. Exposure to these extreme temperatures should be kept to minimum. The collet should be heated, and the die pre-heated to avoid excessive thermal shock. Avoidance of air bridges and force impact are critical during placement. Wire Bonding - Windows in the surface passivation above the bond pads are provided to allow wire bonding to the die's gold bond pads. The recommended wire bonding procedure uses 0.076 mm x 0.013 mm (0.003" x 0.0005") 99.99% pure gold ribbon with 0.5-2% elongation to minimize RF port bond inductance. Gold 0.025 mm (0.001") diameter wedge or ball bonds are acceptable for DC Bias connections. Aluminum wire should be avoided. Thermo-compression bonding is recommended though thermosonic bonding may be used providing the ultrasonic content of the bond is minimized. Bond force, time and ultrasonics are all critical parameters. Bonds should be made from the bond pads on the die to the package or substrate. All bonds should be as short as possible. RoHS Compliant Parts - All Mimix products are RoHS compliant unless specifically ordered with Tin-Lead finish. Ordering Information Part Number for Ordering XM1000-BD-000V XM1000-BD-EV1 Description "V" - vacuum release gel paks XM1000 die evaluation module Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. |
Price & Availability of XM1000-BD-EV1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |